Sartorius Cubis MSU116P User Manual page 76

Task Management
®
76 Cubis MSU User Manual
Automatic Tare after Printing
Should the balance be tared automatically after each printout?
Off, no tare
On (automatic tare after print request)
Settings for SBI Output
SBI Output Mode
How should SBI printout be printed?
: Printout generated by pressing the PRINT P key or by ESC
Single print
command via the interface
Automatic print : Printout generated automatically in the weighing cycle
Stability Parameter for Printout
Should the printout be dependent on balance stability?
Manual without stability
Manual after stability : Printout generated immediately at stability, otherwise
not until after next stability
Format for Printout
How should the printout be formatted?
For other apps/GLP (22 characters)
plus line break ("space line") (CR) and dotted line ("dash line") (LF)
For raw data (16 characters)
break (CR) and dotted line (LF)
: Immediate printout without waiting
: Printout with header; 20 characters
: Printout without header; 14 characters plus line