Sartorius Cubis MSU116P User Manual page 31

3
2
1
t
Determine the required cable length.
t
Return the balance to an upright position and fit the parts onto the balance.
1. Attach the pan support
2. Shield disk (only for models with a readability of 10 mg)
3. Weighing pan
t
Level the balance.
Removing the Display and Control Unit from Models with a Weighing Range of
20 kg or more
3
Remove the weighing pan before unscrewing the control unit, so that
the weighing pan does not fall and cause injury.
t
Turn over the balance so that the pan side is facing down.
t
Remove the two fixing screws using a screwdriver.
t
Remove the control unit and re-insert both screws into their holes.
t
Carefully remove the connection cable from its holder.
y Longer connection cables should only be installed by a Sartorius technician.
Getting Started
®
Cubis MSU User Manual 31