Sartorius Cubis MSU116P User Manual page 127

y The weighing result is displayed.
y It is also possible to see the weighing result on a graphic scale for a set target
range.
It can be seen immediately on the graphic scale if the result is outside
of the tolerance.
t
To switch the display to check mode, select
y The display will now show whether the weighing result has gone over upper
limit ( ) or under the lower limit (
HH
t
To check additional objects, empty the weighing pan and place the next object
on it.
y The display is updated dynamically.
t
You can toggle between weighing and checkweighing at any time by selecting
Weigh or Check .
Checkweighing
Check .
).
LL
®
Cubis MSU User Manual 127