Sartorius Cubis MSU116P User Manual page 25

Balances with a readability of 0.01 mg
1. Plug the DC supply cable of the AC adapter into the power socket of the
electronics module and tighten the threaded fitting.
2. Plug the power cord into the AC adapter.
3. Insert the AC adapter plug into the wall outlet.
y The balance is now ready to use.
2
Safety Precautions
The output line of the adapter has a terminal (GND) connected to the metal
housing of the balance. The data port is also galvanically linked to the balance
housing (GND).
Connecting Electronic Devices (Peripherals)
t
Make absolutely sure that the device is unplugged from the power supply
before connecting/disconnecting any peripheral device (printer, scanner, PC)
to or from the data port.
3
A device connected to the power supply should never be opened.
Getting Started
®
Cubis MSU User Manual 25