Ps2 Interfaces For Barcode Scanner Or Keyboard - Sartorius Cubis MSU116P User Manual

Interfaces
Changing Latency Time
Plug & Play Mode in Autoprint (SBI)
Connecting the Device
Using the Input Device
F1 F2 F3
D
H
6
4
2
®
142 Cubis MSU User Manual
t
Open the setting for the USB serial port in the Windows
– START > My Computer > Control Panel
– System > Hardware > Device Manager
t
Open the Connections submenu.
t
Double-click on USB Serial Port.
t
Select Port Settings > Advanced.
t
Open the settings for the USB serial port, following the above instructions.
t
For a faster rate of communication, change the setting for the latency timer
to 1 msec.
t
Open the settings for the USB serial port, following the above instructions.
t
Stop the Plug & Play mode from running.
Uninstalling the Driver
The software driver for the USB connection can be uninstalled with the Windows
Uninstaller.

PS2 Interfaces for Barcode Scanner or Keyboard

Via the PS2 port you can connect a barcode scanner or a PC keyboard to enter data
and operate the balance.
Installation The interface installation is described in the installation instructions supplied.
t
Plug the connector plug into the PS2 port on the balance.
y The input device is operational; no further settings are required.
You can input entries directly via the keyboard or barcode scanner whenever
an input field is open on the display of the balance.
Key Assignment for the PC Keyboard
The five context-dependent buttons located at the bottom edge of the display are
operated via the Function keys F1 to F5 on the PC keyboard.
F4 F5
If the last button on the right is assigned with the function
also be activated using the Esckey on the keyboard.
Esc
F9 The TASK key is operated via F9 (Open Task menu).
F10 The USER key is operated via F10 (Open User menu).
p
Print The PRINT key is operated via the print key on the keyboard.
Shift F1 Use Shift F1 to select the first entry in a menu.
Shift F2 Use Shift F2 to select the second entry in a menu.
etc.
Pin Assignment PS2
Pin 1: Keyboard_DATA (universal)
Pin 2: Not assigned (larger)
5
Pin 3: Internal ground (GND)
3
1
Pin 4: +5 V
Pin 5: Keyboard_CLK (Set)
Pin 6: Not assigned (smaller)
®
Control Panel:
®
Back , this function can