Sartorius Cubis MSU116P User Manual page 87

Executing a Task: Individual Identifiers
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
y The defined identifiers are displayed (cf. example above).
t
Select Next .
y The predefined lines are printed when the task starts:
Company:
Street:
Weender Landstr.
City:
P
t
Place the sample on the weighing pan and press the
p
.
PRINT key
y The identifier for the printout is displayed and can be changed
if necessary.
y In the example, BATCH was defined for the printout.
t
If required, you can change this value now.
t
Select Next or press the PRINT key
t
To log the value, press the Print key
y The complete printout looks like this:
Company:
Street:
Weender Landstr.
City:
N +
BATCH
N +
BATCH
Sartorius
Goettingen
p
again.
p
.
Sartorius
Goettingen
214.5 g
1
213.3 g
2
Individual Identifiers
Start .
®
Cubis MSU User Manual 87