Sartorius Cubis MSU116P User Manual page 99

Executing a Task: Calculation
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
t
If you want to work with a variable formula, you can now enter or change
the formula.
t
Place the sample on the balance.
y The weight value is displayed.
t
To start the calculation, select
y The calculation results are displayed.
t
To return to the weight value display, select
t
If you want to carry out additional weighing and calculations using the same
formula, place the sample on the balance and then select
t
If you want to carry out additional weighing using a different formula, select
.
Back
t
You can now change the formula and then proceed as described above.
Start .
.
Start
.
Weigh
Calc.
®
Cubis MSU User Manual
Calculation
99