Sartorius Cubis MSU116P User Manual page 62

System Settings (Menu)
®
62 Cubis MSU User Manual
Configuring the Alibi Memory
Here you can switch on the alibi memory, delete the recorded data, and set
the interval for automatic deletion.
t
Use the cursor softkeys to navigate through the
submenu to Alibi memory configuration
Alibi Memory On/Off
t
Select whether you want to have the alibi memory switched on or off.
Automatic Deletion of Older Data
t
Define whether the data stored in the alibi memory should be deleted auto-
matically at regular intervals after a pre-specified time.
t
If data should be regularly deleted, enter the desired interval (deletion cycle)
in days.
Reset and Initialize Alibi Memory
You can delete all data from the alibi memory immediately. The settings for the alibi
memory (on/off, deletion cycle) will remain stored.
t
To delete data in the alibi memory, confirm deletion when prompted.
Updating the Software
®
Cubis software is updated at regular intervals. A detailed description of how
to perform a software update on your balance can be found in Section Updating
the Software.
Restoring Factory Settings
You can reset all settings individually to the factory settings at any time.
t
Use the cursor softkeys to navigate through the
menu to Restore factory settings
t
Mark any settings you wish to reset and select
t
Confirm the reset when prompted.
Device parameters
.
Device parameters
.
Next.
sub-