Sartorius Cubis MSU116P User Manual page 117

y An overview of all settings is displayed.
t
Check all settings and change as required.
y A message asks whether you would like to add another application.
t
If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t
Check all settings and change as required.
t
Enter a short name and a description for the new task.
t
To save the new task, select
Executing a Task: DKD Measurement Uncertainty
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
y If you have selected
value is displayed in a tab (e. g., U 12.01 g). This value is based on the DKD
value set by a service technician.
y If you have selected
of the measurement is displayed in a tab as a percentage of the weight value.
y If you have selected
in a tab in percent.
DKD Measurement Uncertainty
Save .
Start
absolute uncertainty , the uncertainty of the weight
relative uncertainty , the relative uncertainty
, the process accuracy is displayed
process accuracy
.
®
Cubis MSU User Manual 117