Sartorius Cubis MSU116P User Manual page 16

Getting Started
3 3
2 2
1 1
4 4
3 3
2 2
1 1
1
2
3
3
®
16 Cubis MSU User Manual
Installing the Draft Shield Labeled DE for Milligram Balances
t
Carefully fit all parts as shown.
1. Shield plate
2. Pan support
3. Weighing pan
Assembly of Milligram Balances without Glass Draft Shield (DR Option)
t
Fit all components listed below onto the balance in the order given:
1. Pan support (see also next section)
2. Shield plate
3. Weighing pan
4. Draft shield frame
t
First insert the shield plate.
t
Make sure the pin on the pan support is facing toward the front, and slide it
under the clip on the pan retainer.
1. Insert the pan support.
t
After inserting the pan support, press it down against the shield plate so that it
lies flat.
3
Exercise caution to avoid pinching or crushing fingers.
2. Press down on the pan support
t
Place the weighing pan (3) on the pan support.