Sartorius Cubis MSU116P User Manual page 111

Executing a Task: Weighing in Percent
D
t
If you haven't already done so, go to Application Management.
y The task selection is displayed.
t
Select the desired task.
or
t
If the desired task is already marked, select
t
If required, enter the reference percentage (e. g., 100%) or the reference weight.
t
Place the sample on the weighing pan.
In the example it is the reference sample.
y The weight value of the reference is displayed.
t
To start weighing in percent, select
y The values for the reference percentage and the reference weight are displayed.
t
Place the next sample on the weighing pan and select
y The weight value is displayed.
t
To toggle between the display of weight and percent, select
or Weigh .
Weighing in Percent
Start .
Start .
Weigh .
Percent
®
Cubis MSU User Manual 111