Configuring Display And Control Unit Properties; Adjusting The Touch Screen; Configuring Interfaces And Network Settings - Sartorius cubis MPS Quick Reference Manual

System Settings (Menu)
Device parameters
Configure display and control unit properties
Device parameters
Adjust touch screen
Touchscreen adjustment
Touch the mark until you
receive confirmation.
To exit, press [Back]
Back
Device parameters
Interface configuration
Please select the menu item:
Menu a Device parameters a Interface configuration
Network ports setup
Network settings (Ethernet)
Control inputs/outputs
Print to file
FTP server settings
Back
®
26 Cubis MPS Quick Reference Guide
4.5.5

Configuring Display and Control Unit Properties

The following properties of the display and control unit can be changed as necessary:
Menu
,
Language Background colors
Acoustic signals
These general properties are applied to all user profiles, are also used when no user is
logged in, and serve as a template when a new user profile is created.
4.5.6

Adjusting the Touch Screen

Here you can customize the marker button on the touch screen (finger pressure,
Menu
angle of touch, etc.).
t
Follow the instructions on the display.
4.5.7

Configuring Interfaces and Network Settings

Here you can configure serial interfaces and make settings for the network.
Menu
Besides this, you can make settings for:
− Control inputs/outputs
− Print to file
− FTP server settings
A detailed description of the connection options and data interface ports can be
found in the user manual for the Cubis
A detailed description of all the sub-menus, can be found in the user manual for the
Cubis ® MCM model in Chapter "Configuring Interfaces and Network Settings."
t
Touch
Save
,
User field colors
®
MCM model in Chapter "Interfaces."
to save your settings.
, , and
Brightness