Loading Test Program From Internal; Memory (F1); Uploading Test Program From Sd Card (F2) - Sartorius Sartocheck 4 plus Operating Instructions Manual

7.15.1 Loading Test Program from
Internal Memory (F1)
Fig. 7-32 | Program database: Internal memory
Fig. 7-33 | Program database
7.15.2 Uploading Test Program
from SD card (F2)
Fig. 7-34 | Program database: Load test program
When loading test programs from internal memory, all test programs are displayed
i n the program selection list. You can highlight the programs by entering the list
number or using the touch screen. There is an entry line "From ## to ##"above the
program list. In this line, you can highlight test program blocks.
Confirm your selection by pressing enter.
The highlighting can be removed with the button "Undo marking".
The highlighted test program is displayed above the function keys F1-F4.
When test program blocks are highlighted, you can scroll through the selection
list with LIST UP|DOWN.
You can select the following functions:
F1: View
D isplay the parameters predefined in the test program along with
previously defined record data.
F2: Print
P rint out the test program on the internal printer
F3: S ave parameters to SD card
Save the test program to an SD card
F4: S ave to network
Save the test program to the FTP server
F5: S ave as program PLC 1
Save the selected program to memory location PLC 1
F6: S ave as program PLC 2
Save the selected program to memory location PLC 2
F7: D elete
Delete the test program
With this function you can upload test programs previously archived on SD card
b ack into the Sartocheck ® 4 plus program database. Insert the SD card into the
®
S artocheck 4 plus and press PAGE DOWN.
Operation 43