Table of Contents
Advertisement
1
Introduction
The Display Layout
Figure 1-1
numeric mode.
Other display formats are available by pressing
Figure 1-1
1 The status reporting line displays messages and the control status of the
2 The measured channel is shown with a 8480 Series or E-Series power sensor
3 This field displays the menu title.
4 The blue highlight on the right hand side of the window shows it is the
5 The available softkey labels are displayed in these three fields. Additionally,
34
shows the display layout when two windows are configured in dual
1
2
Dual numeric display
power meter.
For example, the status can be either RMT (remote, GPIB, USB or LAN
operation) or LCL (local, front panel operation). The message fields indicate
ERR for any error conditions that occur or informing you to Please Zero the
power sensor.
connected.
For example, Channel Setup or press
displayed.
currently selected measurement display line. This measurement line is the
Upper Window/Upper Measurement.
settings associated with the labeled function are displayed under the label.
,
Disp Type
3
4
5
6
7
and the Zero/Cal menu is
Keysight N1913/1914A User's Guide
.
Advertisement
Table of Contents
