Figure 2-15 Meas Avg Count Pop-Up - Keysight N1913 User Manual

2 General Power Meter Functions
Resolution is a measurement display function and not a channel function. In the
case where a channel is set up in both the upper and lower window and the
resolution settings are different, the highest resolution setting is taken to calculate
the averaging number.
These four resolution levels represent:
– 1, 0.1, 0.01, 0.001 dB respectively if the measurement suffix is dBm or dB.
– 1, 2, 3 or 4 significant digits respectively if the measurement suffix is Ω or %.
Procedure
Set measurement averaging as follows:
1 Press
2 Use the
3 Press
4 Use the
5 Press
Figure 2-15
6 Use the numeric keys to enter the required value and press
7 Press
74
. On dual channel meters select the required channel. The
current setting is shown in the Meas Avg field (
Channel Setup screen. The default is
and
and use the
If you have selected AUTO or OFF proceed at step 7. If you have selected MAN
proceed as follows.
key to select the Meas Avg: value field.
to display the Meas Avg Count pop-up.
Meas Avg Count pop-up
key to close the Channel Setup screen.
AUTO
keys to select the Filter setting field.
and to step through the available settings.
Keysight N1913/1914A User's Guide
, MAN, or
AUTO OFF
.
Enter
) on the
.