Keysight N1913 User Manual page 201

Now, set the frequency of the signal you want to measure. The power meter
automatically selects the appropriate calibration factor.
4 Press
5 Use the
Figure 7-3
6 Confirm your choice by pressing
7 Press
8 Proceed to make the measurement.
9 Reconnect any required attenuators or adaptors and connect the power sensor
The corrected measurement result is displayed.
Keysight N1913/1914A User's Guide
. On dual channel meters select the required channel.
and
to display the Frequency pop-up. Use the numeric keypad to enter the
required value in the Frequency pop-up window.
Frequency pop-up
key to close the Channel Setup screen.
to the signal to be measured.
Using U2000 Series USB Power Sensors
keys to highlight the Frequency value field and press
or
MHz GHz
.
7
201