Using 8480 Series Power Sensors
5
Editing frequency dependent offset tables requires the following steps:
1 Identify and select the table you want to edit.
2 Rename the table.
3 Enter the frequency and offset pairs.
4 Save the table.
Procedure
First select the table you want to edit as follows:
1 Press
,
Tables
,
to display the Sensor Tbls screen.
Sensor Cal Tables
Figure 5-9
"Sensor Tbls" screen
2 Choose the table you want to edit using the
and
keys. Press
to display the Ed it Cal screen as shown in
Figure
5-10.
Ed it Table
Keysight N1913/1914A User's Guide
167