5
Using 8480 Series Power Sensors
Procedure
First select the table for the sensor you are using as follows:
1 Press
2 Use the
Figure 5-6
When no data is contained in the highlighted table, the
NOTE
(grayed out).
3 Press
Sensor Table 5 Selected
Figure 5-7
4 To change the frequency, press
164
,
Tables
and
to highlight
Table
On
Sensor table selected
to complete the selection of the calibration factor table.
Done
Figure 5-7
shows which offset table is selected.
Frequency dependent offset indicator
highlight the Frequency field.
,
Sensor Cal Tables
keys to highlight one of the 20 table titles and press
.
and use the
Keysight N1913/1914A User's Guide
.
key is disabled
Table
and
keys to