Editing a Register's Name
1 If you have not already done so, press
2 Use the
Figure 2-39
3 Use
4 Use
5 Use
6 To confirm your choice press
Recalling a Measurement Setup
1 Press
2 Use the
Figure 2-40
3 Press
Keysight N1913/1914A User's Guide
and
The selected name is displayed in a pop-up window. Modify this as required:
File name pop-up
and
keys to modify the character on which the cursor is currently
positioned.
or
to move to other characters.
and
Insert Char
,
Save/Recall
and
key is disabled (grayed out) when an unused register is selected.
Recall
Recall pop-up
.
Confirm
General Power Meter Functions
keys to select the required register and press
as required.
Delete Char
.
Enter
.
keys to select the required register and press
,
.
Save/Recall
2
.
Ed it Name
. The
Recall
101