2
General Power Meter Functions
Saving and Recalling Power Meter States
To reduce repeated setup sequences, you can save a maximum of ten power
meter states in the non-volatile memory.
The save/recall functions are part of the Sys/Inputs menu, accessed by pressing
the
To save a measurement setup:
1 Press
Figure 2-37
2 Using the
3 The power meter prompts you to press
Figure 2-38
100
key.
,
Save/Recall
Figure
2-37.
Save/Recall screen
and
To change the name of a register -See
starting on page 101, otherwise press
Save confirm pop-up
to display the Save/Recall screen as shown in
keys, select an available name from the displayed list.
Chapter 2, "Editing a Register's Name,"
.
Save
Confirm
Keysight N1913/1914A User's Guide
to proceed.