Table of Contents
Advertisement
6 This displays the measurement units, either dBm or Watts (W).
7 This displays the number of pages in the current menu. For example, 1 of 2
Figure 1-2
Figure 1-2
8 The channel measurement frequency.
9 The upper window is configured to show a single numeric display.
10 The lower window is configured to show an analog meter which displays the
11 This displays the connected sensor, the offset value, and the acquisition mode
12 The blue highlight on the right hand side of the window shows it is the
Keysight N1913/1914A User's Guide
Softkeys labels that are grayed out cannot be selected.
indicates that there are two pages in the menu and the first page is currently
displayed. Pressing the softkey displays the next page, indicated by 2 of 2
(press the softkey to display the previous menu page).
8
9
10
Single numeric and analog display
shows the default display mode of two measurement windows.
measurement result and the meter scaling.
on the channel. On dual channel models, it shows for both channels.
currently selected measurement display line.
Using the
,
, or
selection.
Using the
key on numeric measurement results window, you can
choose either two rectangular windows, a single enlarged window, or a full
screen display. The display style is applied to the currently selected window or
measurement line.
keys, you can change the measurement window
Introduction
1
11
12
35
Advertisement
Table of Contents
