Front Panel Keys And Connections - Keysight N1913 User Manual

Front Panel Keys and Connections

This section briefly describes the functions of the front panel keys and connectors.
These keys are located to the left of the display.
Key
Keysight N1913/1914A User's Guide
Function
Press this key to preset the power-meter to the default setting.
Press this key to control the power meter from the front panel when it is operating via the remote
interfaces (when Local Lock Out is not enabled).
Press this key to select the upper or lower measurement window. The selected window is highlighted
by a blue line on the right side of the window. Any measurement setup you create is performed in the
selected window.
Press this key to choose windowed, expanded, or full-screen display of a numeric measurement.
Press this key to switch the meter between on and standby. When power is supplied, the
background LED is red. Pressing the key, switches the power meter on and the background LED is
green. When the meter is powered on, the start-up will take approximately 25 seconds.
Introduction 1
29