Figure 1-6 Message To Identify The Instrument - Keysight N1913 User Manual

When the front panel identification indicator is turned on, a blinking "IDENTIFY"
message is displayed on the screen of the front panel. See
"IDENTIFY" message will blink to identify the instrument until you click Turn Off
Front Panel Identification Ind icator.
Figure 1-6
When the instrument is configured to LAN, the Lan Status on
screen will show the LAN error condition and status of the LAN configuration
connection. There are six types of Lan Status messages that may occur. See
Figure
Table 1-1
Type of message
Lan: No Faul t
Status: Initialized
Lan: No Faul t
Status: Running
Lan: Faul t
Status: Initialization failed
Lan: Faul t
Status: Disconnected
Keysight N1913/1914A User's Guide
Message to identify the instrument
1-1. See also Figure 1-7
Type of Lan Status message
Description
– A valid IP address is successfully obtained using selected LAN configuration
and the network state is initialized.
– A valid IP address is successfully obtained using selected LAN configuration,
while network is running.
– IP conflict occurs, or
– IP address failed to be obtained using selected LAN configuration, or
– No LAN configuration is selected.
– LAN cable is unplugged.
"IDENTIFY" message to
blink when the front panel
identification indicator is
turned on.
for the example of Lan Status message.
Introduction
Figure 1-6. The
Remote Interfaces
1
43