Memory Erase/Secure Erase; Figure 2-56 Activate Memory Erase Using Combo Keys - Keysight N1913 User Manual

Memory Erase/Secure Erase

The memory erase and secure erase features will erase the battery backed SRAM,
and flash file system. The flash file system includes the power meter states, cal
factor tables, frequency dependant offset tables, and the secure blank password
stored in the EEPROM. Upon completion, the meter 's contents will be initialized
to the default settings. These features can only be activated via the front panel.
The memory erase feature can be invoked when you forget the 6-digit password
set during secure blank.
To perform memory erase/secure erase, do one of the followings:
Memory Erase
1 Simultaneously press the fourth softkey from the top and the
2 During memory erase, the splash screen will display "Clearing Memory...".
Figure 2-56
Keysight N1913/1914A User's Guide
immediately upon power-on (see
When memory erase is complete, "Clearing Memory...done" will be displayed.
Press simultaneously
Activate memory erase using combo keys
General Power Meter Functions
Figure 2-56).
2
key
119