Figure 2-8 Frequency Dependent Offset Tables Display - Keysight N1913 User Manual

2 General Power Meter Functions
The State column indicates if any frequency dependent offset tables are currently
selected. The Offset Tables screen is shown in
NOTE
You can also view which FDO table is being used by pressing the
Offsets
and press
Procedure
Select an offset table as follows:
1 Press, either:
Figure 2-8
2 Use the
66
and use the
to display the table.
a ,
Tables
b ,
Offsets
setting field and press
Frequency dependent offset tables display
and
( or
Table A Table B Table
and keys to highlight the FDO Table setting field
, .
Freq. Dep. Offset
and use the and
to display the table.
keys to highlight one of the 10 table titles and press
for dual channel) to highlight
Figure 2-8.
keys to highlight the FDO Table
.
On
Keysight N1913/1914A User's Guide
,