Table of Contents
Advertisement
4 Press Network DHCP if you need to set any optional settings.
5 Press Restart Network.
Figure 1-3
6 Press
7 If you intend to program over LAN or use such programs, make sure you have
8 Use the Connection Expert utility of the IO Libraries Suite to add the power
If you have installed other I/O software, refer to documentation that
NOTE
accompanies the software.
9 You can use various programming environments to control the power meter.
Keysight N1913/1914A Installation Guide
A pop-up appears for 5 seconds (see
bottom of the display to see when the server has assigned an address.
LAN Network Restart Pop-up
, to return to a measurement screen.
installed I/O software on your computer.
meter and verify a connection. When identifying the instrument, it is easiest to
use the IP address that you noted in
For an overview about programming instruments via LAN, refer to the
connectivity guide.
Getting Started
Figure
1-3). Monitor the Status at the
step 6
above.
1
43
Advertisement
Table of Contents
