Figure 1-3 Full Screen Numeric Display - Keysight N1913 User Manual

1 Introduction
Figure 1-3
Figure 1-3
13 This field displays Minimum Hold if range hold is set to minimum.
14 The information in this field is displayed on two lines and depends on the
15 This field displays Dty Cyc if a duty cycle is set.
16 This field displays Ofs if an offset is set.
17 This field displays Rel if relative mode is on.
18 This field indicates the measurement result is beyond the configured upper or
36
14
13
Full screen numeric display
shows a single numeric full screen displaying a relative result.
sensor type, sensor calibration table, frequency dependent offset table
currently selected, and the measurement frequency.
lower limit. If the measurement is within the limits this field is empty. If the
measurement result is less than the minimum limit set, Undr Lmt is displayed.
If the measurement result is more than the maximum limit set, Over Lmt is
displayed.
15
16
Keysight N1913/1914A User's Guide
17
18