1
Introduction
These keys and connectors are associated with the measurement channels and
are located on the right-hand side of the front panel.
Key
32
Function
The arrow keys are used for navigation around the parameter entry screens. The up and down
arrows are used for selecting values from a pop-up list. They are also used to enter text, for
example, table names.
Press this key to select a highlighted field to allow data entry, check a checkbox and terminate
entry of a popup list.
Press this key to access the zero and calibration menus.
Press this key to reset the MAX HOLD and MIN HOLD measurement.
Press these keys to enter numeric values in the pop-up fields, for example, the offset values. To
complete the entry, use the softkey.
Keysight N1913/1914A User's Guide