Step Detection - Keysight N1913 User Manual

Step Detection

To reduce the filter settling time after a significant step in the measured power the
filter can be set to re-initialize upon detection of a step increase or decrease in the
measured power. Step detection can be set in both manual and automatic
measurement average modes.
Procedure
Set step detection as follows:
1 Press
2 Use the
3 Press
4 Press
Keysight N1913/1914A User's Guide
. On dual channel meters select the required channel.
and keys to select the Step Detect setting field.
to check the step detection to on or off.
key to close the Channel Setup screen.
General Power Meter Functions 2
75