10 To change the settings, use the
Figure 5-4
11 Press
12 Connect the power sensor to the signal to be measured.
13 The corrected measurement result is displayed.
Figure 5-5
Keysight N1913/1914A User's Guide
value field and press
numeric keypad to enter the required value in the Cal Factor pop-up window.
Calibration factor pop-up window
to complete the entry.
%
Calibration factor display
Using 8480 Series Power Sensors
and
keys to highlight the Cal Fac
to display the Cal Factor pop-up. Use the
Calibration Factor
5
161