Figure 2-20 Channel Setup Display - Keysight N1913 User Manual

Figure 2-20
When 8480 Series, N8480 Series, E-Series E4410, E-Series E9300 or U2000
NOTE
Series sensor is connected, Sensor Mode is set to AVG only by default.
4 Press
5 Press
6 Select either
7 Press
Keysight N1913/1914A User's Guide
Channel Setup display
. The Trigger menu is displayed.
Acqn
softkey to configure the trigger.
Sing Trig
– is a single shot mode. After triggering, the measurement is
Sing Trig
halted, and the
measurement by pressing the
– is a continuous trigger mode. The symbol
Cont Trig
Settings
to configure the remaining trigger parameters. The trigger
Settings menu consists of two pages.
Figure 2-22 shows page 2.
General Power Meter Functions
or .
Cont Trig
symbol is displayed. You can start another
key.
Figure 2-21
or is displayed.
shows page 1 and
2
81