Figure 6-4 Frequency Pop-Up - Keysight N1913 User Manual

Now, set the frequency of the signal you want to measure. The power meter
automatically selects the appropriate calibration factor.
4 Press
5 Use the
Figure 6-4
6 Confirm your choice by pressing
7 Press
8 Connect the power sensor to the signal to be measured. The corrected
Keysight N1913/1914A User's Guide
. On dual channel meters, select the required channel.
and
to display the Frequency pop-up. Use the numeric keypad to enter the
required value in the Frequency pop-up window.
Frequency pop-up
key to close the Channel Setup screen. Proceed to make the
measurement.
measurement result is displayed.
Using N8480 Series Power Sensors
keys to highlight the Frequency value field and press
or
MHz GHz
.
6
181