Other Pump Control Algorithms; Set Relays To Alternate Duty Backup; Set Relays To Fixed Duty Assist - Siemens HydroRanger 200 HMI Operating Instructions Manual

Other pump control algorithms

Set relays to Alternate Duty Backup

Parameter
2.8.1.4. Relay Function
2.8.1.4. Relay Function
2.8.1.4. Relay Function
Set the Relay ON Setpoints
Parameter
2.8.1.5. ON Setpoint
2.8.1.5. ON Setpoint
2.8.1.5. ON Setpoint
Set the Relay OFF Setpoints
Parameter
2.8.1.6. OFF Setpoint
2.8.1.6. OFF Setpoint
2.8.1.6. OFF Setpoint

Set relays to Fixed Duty Assist

Parameter
2.8.1.4. Relay Function
2.8.1.4. Relay Function
2.8.1.4. Relay Function
Set the Relay ON Setpoints
Parameter
2.8.1.5. ON Setpoint
2.8.1.5. ON Setpoint
2.8.1.5. ON Setpoint
Set the Relay OFF Setpoints
Parameter
2.8.1.6. OFF Setpoint
2.8.1.6. OFF Setpoint
2.8.1.6. OFF Setpoint
Page 86 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
Index Mode
1 Alternate Duty Backup Sets the pump relays
2 Alternate Duty Backup
3 Alternate Duty Backup
Index Value Description
1 0.4 m Sets the three setpoints for the pump
relays. The first cycle will use these
2 0.3 m
setpoints. Subsequent cycles rotate
3 0.2 m
the setpoints among the pumps.
Index Value Description
1 1.3 m Sets the three setpoints for the pump
relays.
2 1.3 m
3 1.3 m
Index Mode
1 Fixed Duty Assist Sets the pump relays (Relays
2 Fixed Duty Assist
3 Fixed Duty Assist
Index Value Description
1 0.4 m Sets the three setpoints for the pump
relays. The setpoints remain attached
2 0.3 m
to the pump relays.
3 0.2 m
Index Value Description
1 1.3 m Sets the three setpoints for the pump
relays.
2 1.3 m
3 1.3 m
Description
(Relays 1, 2, and 3) to
Alternate Duty Backup.
Description
1, 2, and 3) to Fixed Duty
Assist. Multiple pumps can
run simultaneously.
A5E36281317