Connecting
Safety notes for connection
•
Verify that all system components are installed in accordance with instructions.
•
Connect all cable shields to the HydroRanger 200 HMI shield terminals to avoid
differential ground potentials.
•
Keep exposed conductors on shielded cables as short as possible to reduce noise
on the line caused by stray transmissions and noise pickup.
HydroRanger 200
A5E36281317
HMI
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
Siemens transducer(s)
Siemens TS-3
temperature sensor
Laptop
Customer alarm,
pump, or control
device
Customer device,
digital output
Customer device,
analog output
Customer network or
modem
SmartLinx® Card
Display, PLC, chart
recorder, or other
control device
Page 19