Table of Contents
Advertisement
Parameters
The HydroRanger is configured through its parameters, and the application determines
the parameter values which are entered into the unit.
Please check your value entries carefully before operating the HydroRanger to ensure
optimum performance.
Key terms
In the following parameter tables, please note these key terms:
•
Default - the factory-set value or option; indicated with an asterisk (*) or specified
as a preset value.
•
Global - pertains to values that are common for all inputs and outputs on the unit.
•
Index - when parameters apply to more than one input, they are indexed. The index
selector value defines the input/output for that parameter. For example, index
relates to transducer inputs or mA outputs, and can also refer to relays,
communications ports, and other parameters.
Notes:
• Parameter range values are displayed in the default of the defined unit of
measure. For example, if a parameter description states that it is
Units
, the range for that parameter will be shown in meters [as meters (m) is
the default for Units.
• The number of decimals displayed for a parameter value will depend on the
unit of measure, unless decimal places can be set by the user (such as,
Totalizers -
• To enter Program mode using the local push buttons, press
return to Measurement mode.
A5E36281317
2. 1 4.4. Totalizer Decimal Position
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
defined in
).
. Press
to
Page 117
Advertisement
Table of Contents
Troubleshooting
