Relay Controlled By Communications; Tracking Pump Usage - Siemens HydroRanger 200 HMI Operating Instructions Manual

Relay controlled by communications

A relay can be controlled directly by a remote system through communications. No other
control schemes can then be used with a relay configured this way. Communications can
be used to force status of some control relays, such as pumps.
Settings:
Parameter
2.8.1.4. Relay Function

Tracking pump usage

You can find out how much an individual pump has been used by viewing the pump
records parameters.
Information available
Current RUN time
Total pump hours
Total pump starts
Total pump RUN on occurrences
A5E36281317
Index
5 Communication Sets Relay 5 to
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
Mode Description
communications control.
Parameter access
3.2.7.3. Pump Run Time
3.2.7.2. Pump Hours
3.2.7.4. Pump Starts
3.2.7.5. Pump Run-ONs
Page 95