Siemens HydroRanger 200 HMI Operating Instructions Manual page 187

2.11.5.5. Echo Lock Window
2.11.5.6. Fuzz Filter
2.12. Display
2.12.1. Local Display Backlight
Controls the LCD backlighting.
Index
Options
The backlight can be forced ON or OFF, or be controlled by a programmer, in
which case it will turn OFF five minutes after the last key is pressed.
A5E36281317
Adjusts the size of the Echo Lock Window.
Single-point model
Index
Global
Range: 0.000 to 99.00 m or equivalent, depending on
Units
Values
Preset: 0.000
2.3.4. Response Rate
Altered by
•
Related
•
The Echo Lock Window is a distance window (
the echo and used to derive the Reading. When a new measurement
is in the window, it is re-centered and the new reading calculated.
Otherwise, the new measurement is verified by
before the reading is updated.
When 0 is entered, the window is automatically calculated after each
measurement. For slower
2.3.4. Response Rate
narrow; for faster
wider.
Stabilizes the reported level, due to level fluctuations (such as a
rippling or splashing liquid surface) within the 2. 1 1.5.5. Echo Lock
Window
Single-point model
Index
Global
Range: 0 to 100 (0 = OFF)
Values
2.3.4. Response Rate
Altered by
•
Related
•
This value (in % of
Response Rate
is changed. The higher the value entered, the greater
the fluctuation stabilized.
Global
OFF
*ON
Timed
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
; the nearest acceptable value is returned.
2. 1 . 1 . Units
2. 1 1.5.4. Echo Lock
2.3.4. Response Rate
values, the window becomes
2.2.2. Span
2. 1 1.5.5. Echo Lock Window
2.2.2. Span
) is automatically altered when
Dual-point model
Transducer
2. 1 . 1 .
2.1.1. Units
) centered on
2. 1 1.5.4. Echo Lock
values, the window is
Dual-point model
Transducer
2.3.4.
Page 177