Siemens HydroRanger 200 HMI Operating Instructions Manual page 189

Notes:
• This method does not calculate volume. It must not be used in place of
the volume parameters if any volume dependent features (such as
pump efficiency) are used. To calculate true volumes, see
page 140.
• Avoid entering a value that exceeds the display capabilities when
multiplied by the maximum current reading. If value exceeds four digits,
#### is shown.
2.12.6. Offset Reading
Adds the specified value to the level reading, usually to reference the reading
to sea level or another data level.
Index
Values
Related
The operation of the device is not affected by the Offset Reading. This value is
used for display purposes only. All control measurements are still referenced
to Empty.
2.12.7. Default Auxiliary Reading
Determines the parameter that displays in the Auxiliary Reading after
powering up the device.
Index
Options
A5E36281317
conversion. For example, if the reservoir contains 100 liters per
vertical meter, use 100 to get the reading in liters.
Level
Range: -999 to 9999
Preset: 0.000
3.2.6.2. Reading
Global
*Totalizer
Level
Space
Distance
Volume
Flow
Head
Temperature
Rate
Fail-safe remaining
Confidence
mA Output 1
mA Output 2
mA Input
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
2.7. Volume
on
Page 179