2.5.1. mA Output Selector
Sets the mA output index for all parameter settings.
Options
2.5.2. mA Output Range
Determines the mA output range.
Index
Options
Related
If either 0 to 20 mA or 4 to 20 mA is selected, the mA output is directly
proportional to the mA Function. If either 20 to 0 mA or 20 to 4 mA is selected,
then the output is inversely proportional. After setting
verify that
automatically by setting the
2.5.3. Current Output Function
Alters the mA output/measurement relationship.
Index
Options
Related
Altered by
2.5.4. mA Output Allocation
Sets the input source from which the mA output is calculated.
Index
Page 136
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
*mA Output 1
mA Output 2
mA Output
OFF
0 to 20 mA
*4 to 20 mA
20 to 0 mA
20 to 4 mA
2.5.9. Milliamp Output
2.5.7. Minimum mA Limit
2.5.2. mA Output Range
mA Output
mA function
OFF
Level
Space
*Distance
Volume
Flow
Head
Volume Rate
mA Input
Comms Input
2.5.4. mA Output Allocation
•
2.5.9. Milliamp Output
•
2. 1 .3. Sensor Mode
mA Output
2.5.2. mA Output Range
has a valid entry, as it is not changed
.
2.1.3. Sensor Mode
Level, differential, or average
Space
Distance
Level or space
OCM
,
A5E36281317