Siemens HydroRanger 200 HMI Operating Instructions Manual page 112

2.2.7. Range Extension
2. Use
weir, and above the bottom of the channel. It should be used if the surface
monitored can fall past the Empty level in normal operation without reporting an
LOE. The value in
than the range of the transducer.
The examples on the following pages show both methods.
Page 102 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
2.2.4. Empty
where the
2.2.7. Range Extension
α
level is set to the bottom of the
2.2.4. Empty
is added to
2.2.4. Empty
2.2.7. Range Extension
and can be greater
A5E36281317