Siemens HydroRanger 200 HMI Operating Instructions Manual page 53

Temperature Source
Selects the source of the temperature reading used to adjust the speed of sound.
Index
Options
2.11. 1 .4. Temperature Source on page 157
See
Fixed Temperature
Sets the temperature of the source when there is no temperature-sensing
device connected.
This parameter only displays if Fixed Temperature is selected for
Temperature Source.
Vessel Shape
Defines the vessel shape and allows the HydroRanger to calculate Volume instead
of Level. If None is selected, no volume conversion is performed. Select the vessel
shape matching the monitored vessel or reservoir.
Options
See page 134 for illustrations. If Universal Linear or Universal Curved is selected,
enter values for level and volume breakpoints after completing the wizard (see page
137).
A vessel shape must be selected to proceed through the QS Volume Wizard.
A5E36281317 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
Transducer
*AUTO
Fixed Temperature
Transducer
External TS-3
Average of Sensors
Range: -100.0 to +150.0 °C
Value
Default: +20.0 °C
* None
Flat Level Bottom
Conical Bottom
Parabolic Bottom
Half Sphere Bottom
Flat Sloped Bottom
Flat Ends
Parabolic Ends
Sphere
Universal Linear
Universal Curved
for more information.
Page 43