Siemens HydroRanger 200 HMI Operating Instructions Manual page 176

2.11.1.9. Offset Correction
2.11.2. Echo Select
2.11.2.1. Transducer Selector
2.11.2.2. Algorithm
Page 166 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
The value altered when a sensor offset calibration is performed using
2.2.5. Sensor Offset.
Single-point model
Index
Global
Range: -999 to 999.0
Values
2.2.5. Sensor Offset
Related
Alternatively, if the amount of offset correction required is known,
enter the amount to be added to the reading before display.
Sets the transducer index for all parameters applicable to this sub-
menu.
Selects the algorithm to generate the measured value from the
profile.
Single-point model
Index
Global
ALF Area Largest First
A Echo Area
L Largest Echo
F First Echo
AL Area Largest
AF Area First
Options
LF Largest First
*BLF Best F-L
BL Best L
BF Best F
TF True First Echo
2. 1 1.2.5. Reform Echo
•
2. 1 1.2.6. Narrow Echo Filter
•
2. 1 1.2.7. Spike Filter
•
Related
2. 1 1.2.9. Echo Marker
•
3.2.9.2. Long Confidence
•
Use this to select the algorithm(s) the Sonic Intelligence® echo
selection is based on. Use
determine which algorithm gives the highest confidence under all
level conditions. If the wrong echo is processed, observe the echo
processing displays and select an alternate algorithm using this
parameter.
For details on echo determinations and suggested usage, see
Appendix A: Technical reference
Dual-point model
Transducer
Dual-point model
Transducer
3.2.9.2. Long Confidence
Algorithm
- on page 234.
on page 198 to
A5E36281317