Siemens HydroRanger 200 HMI Operating Instructions Manual page 150

2.6.6. Raw mA Input Value
Shows the raw mA input supplied by an external device.
Index
Values
2.7. Volume
Carries out a volume conversion from a Level measurement.
2.7.1. Level Selector
Sets the Level Point index for all parameters applicable to this sub-menu.
2.7.2. Vessel Shape
Enters the Vessel Shape value matching the monitored vessel or wet well.
Liquid (material) volume is calculated when
Alternatively, the remaining vessel capacity is calculated when
Mode
volume. To convert readings to volumetric units, see
Page 140 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
mA Input
Range: 0.000 to 20.00 (Read only)
=Space. In RUN mode, readings are displayed in percent of maximum
Vessel Shape
None
A
A
2. 1 .3. Sensor Mode
2.7.3. Maximum Volume
LCD DISPLAY/
Description
* None
Flat Level Bottom
Conical Bottom
Parabolic Bottom
= *Level.
2.1.3. Sensor
.
A5E36281317