Siemens HydroRanger 200 HMI Operating Instructions Manual page 185

2.11.4.4.5. TVT Brkpt. 35
2.11.4.4.6. TVT Brkpt. 36
2.11.4.4.7. TVT Brkpt. 37
2.11.4.4.8. TVT Brkpt. 38
2.11.4.4.9. TVT Brkpt. 39
2.11.4.4.10. TVT Brkpt. 40
2.11.5. Measurement Verification
2.11.5.1. Transducer Selector
2.11.5.2. Up Sampling
2.11.5.3. Down Sampling
A5E36281317
Sets the transducer index for all parameters applicable to this sub-
menu.
Sets the number of consecutive echoes that must occur above the
echo currently locked onto before the measurements are validated as
the new reading (for 2. 1 1.5.4. Echo Lock = Maximum verification or
Material agitator).
Single-point model
Index
Global
Range: 1 to 50
Values
Preset: 5
•
Related
•
2.11.5.4. Echo Lock
Maximum verification
Material agitator
2. 1 1.5.3. Down Sampling
See
Sets the number of consecutive echoes that must occur below the
echo currently locked onto before the measurements are validated as
the new reading (for 2. 1 1.5.4. Echo Lock = Maximum verification or
Material agitator)
Single-point model
Index
Global
Range: 1 to 50
Values
Preset: 2
•
Related
•
2.11.5.4. Echo Lock
Maximum verification
Material agitator
HydroRanger 200 HMI – OPERATING INSTRUCTIONS
2. 1 1.5.4. Echo Lock
2. 1 1.5.3. Down Sampling
Up Sampling value
for more details.
2. 1 1.5.4. Echo Lock
2. 1 1.5.2. Up Sampling
Down Sampling value
Dual-point model
Transducer
5
5
Dual-point model
Transducer
5
2
Page 175