Siemens HydroRanger 200 HMI Operating Instructions Manual page 57

1.1.3. QS Flow
Use this wizard to configure simple Flow applications.
Exponential
Set
exponent
*Available only on dual-point models.
A5E36281317 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
Start of QS
Flow Wizard
Select meas.
point*
Select
transducer
Select
temp.
source
Set unit and
setpoints
Set
PMD
type
Palmer- H-Flume
Bowlus
Set Set
flume flume
width height
Set flow units
and calib. data
Config.
another
meas. pt.?
NO
Flow Wizard
complete
Fixed
Temp
- Span
Units
-
- Response Rate
- Empty
Rectangular Thin-plate
Flume V-notch
Set Set
- Flwrt Units
- Flwrt Units
- Notch angle
- Appr W
-Throat W
-Hump H
- Throat L
Max. Head - Flowrate Decimal
-
- Zero Head - Flowtime Units
- Max. Flow - Low Flow Cutoff
YES
Page 47