Siemens HydroRanger 200 HMI Operating Instructions Manual page 66

Start of QS Pump Control Wizard
Shows the type of Wizard to be executed.
Options
Relay Selector
Selects the relay to be configured.
Options
Relay Function
Sets the pump function for the relay.
Options
2.8.1.4. Relay Function on page 141
See
Level Source
Sets the level source for the indexed relay .
Index
Options
2.8.1.2. Level Source on page 140
See
Service Ratio
Selects pump usage based on the RUN time ratio rather than last used.
Value
This parameter displays only if a Service Ratio algorithm is selected for Relay
Function.
Page 56 HydroRanger 200 HMI – OPERATING INSTRUCTIONS
CANCEL
START
*Relay 1
Relay 2
Relay 3
Relay 4
Relay 5
Relay 6
Fixed Duty Assist
Fixed Duty Backup
Alternate Duty Assist
Alternate Duty Backup
Service Ratio Duty Assist
Service Ratio Duty Backup
First In First Out
Relays
*Point 1
Point 2
Point 3
for more details.
Range: 0 to 255
Default: 1
for more details.
A5E36281317