Alarm Port Show Command; Figure 149 Alarm Show Command Example - ZyXEL Communications IES-1248-71 User Manual

Chapter 46 Alarm Commands
The source is where the alarm originated. This is either a DSL port number, one of the
Ethernet ports (enet 1 or 2), or "eqpt" for the system itself.

Figure 149 Alarm Show Command Example

ras> alarm tablelist
no alarm
clearable
--- ------ -------------------------
---
1 dsl (
2 dsl (
3 dsl (
4 dsl (
5 dsl (
6 dsl (
7 dsl (
8 dsl (
9 dsl (
10 dsl (
11 dsl (
12 dsl (
13 dsl (
14 dsl (
15 dsl (
16 eqpt ( 10000)vol_err
17 eqpt ( 10001)temp_err
18 eqpt ( 10002)fan_err
19 eqpt ( 10003)hw_rtc_fail
Press any key to continue, 'e' to exit, 'n' for nopause

46.4 Alarm Port Show Command

Syntax:
ras> alarm port show [<severity>|all]
This command displays port alarm severity level thresholds. The system reports an alarm on a
port if the alarm has a severity equal to or higher than the port's threshold.
306
condition
5000)line_up
5001)line_down
5002)ad_perf_lol_thresh
5003)ad_perf_lof_thresh
5004)ad_perf_los_thresh
5005)ad_perf_lop_thresh
5006)ad_perf_es_thresh
5007)ad_perf_rate_chg
5008)ad_perf_ses_thresh
5009)ad_perf_uas_thresh
5010)ad_atuc_loftrap
5011)ad_atuc_lostrap
5012)ad_atur_loftrap
5013)ad_atur_lostrap
5014)ad_atur_lprtrap
facility snmp syslog severity
--------- ---- ------ -------- ------
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
local1 V V
IES-1248-71/73 User's Guide
info -
minor V
info V
info V
info V
info V
info V
info V
info V
info V
minor -
minor -
minor -
minor -
minor -
critical -
critical -
critical -
critical -