GS-3012/GS-3012F User's Guide
Figure 133 no port-access-authenticator Command Example
ras(config)# no port-access-authenticator
ras(config)# no port-access-authenticator 1,3-5 reauthenticate
ras(config)# no port-access-authenticator 1,6-7
31.7.5 no ssh
Syntax:
where
key
<rsa1|rsa|dsa>
known-hosts
<host-ip>
known-hosts
<host-ip>
[1024|ssh-
rsa|ssh-dsa]
An example is shown next.
• Disable the secure shell RSA1 encryption key.
• Remove the remote host with IP address 172.165.1.8 from the list of known hosts.
• Remove the remote host with IP address 172.165.1.9 and with an SSH-RSA encryption
key from the list of known hosts.
Figure 134 no ssh Command Example
ras(config)# no ssh key rsa1
ras(config)# no ssh known-hosts 172.165.1.8
ras(config)# no ssh known-hosts 172.165.1.9 ssh-rsa
31.8 interface Commands
These are some commonly used commands that belong to the interface group of commands.
203
no ssh key <rsa1|rsa|dsa>
no ssh known-hosts <host-ip> <cr>
no ssh known-hosts <host-ip> [1024|ssh-rsa|ssh-dsa]
Disables the secure shell server encryption key. Your switch
supports SSH versions 1 and 2 using RSA and DSA
authentication.
Remove specific remote hosts from the list of all known hosts.
Remove remote known hosts with a specified public key (1024-
bit RSA1, RSA or DSA).
Chapter 31 Command Examples