Port Tlspvc Delete Command - ZyXEL Communications MSC1000G User Manual

25.14.1 port tlspvc delete Command

Syntax:
port tlspvc delete <slot-port-vpi/vci>
This command clears TLS settings for the PVC.
25.14.2 port tlspvc set Command
Syntax:
port tlspvc set <slot-port-vpi/vci> <profile> llc|vcmux <vid> <priority>
where
<profile>
llc|vcmux
<vid>
This command sets the second VLAN tag to add to the packets from the PVC.
The following example adds a VLAN tag (
on PVC (
1/33
ras> port tlspvc set 3-2-1/33 DEFVAL llc 100 12
25.14.3 port tlspvc show Command
Syntax:
port tlspvc show <slot>|<slot-port>|<slot-port-vpi/vci>
This command displays the TLS settings for the specified slot/port/PVC.
ras> port tlspvc show 3-2
pvc
-------------- ------- ----- ------ ---- -------------------
3-2-1/33
ras>
Chapter 25 port Commands
= Name of an ATM profile.
= Encapsulation method (llc or vcmux).
= The VLAN ID the switch adds to the traffic on the PVC. This is
the VLAN ID known in the service provider's network.
Note: Make sure this VLAN ID is not already used for
MVLAN or PAE.
) on port of the line card in slot
2
type mux pvid
tls llc
) to the traffic using the
100
.
3
pri profile
100 1 DEFVAL
MSC1000G User's Guide
ATM profile
DEFVAL
389