Chapter 12: Switching Commands - Centrecom FS980M/9 Command Reference Manual

12
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
switching.
For more information, see the
Guide.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A
"backpressure" on page 344
"clear loop-protection
"clear mac address-table
"clear mac address-table
"clear port counter" on page 350
"clear port-security intrusion" on page 351
"debug loopprot" on page 354
"debug platform packet" on page 355
"duplex" on page 357
"flowcontrol (switch port)" on page 359
"linkflap action" on page 361
"loop-protection loop-detect" on page 362
"loop-protection action" on page 363
"loop-protection action-delay-time" on page 364
"loop-protection timeout" on page 365
"mac address-table acquire" on page 366
"mac address-table ageing-time" on page 367
"mac address-table static" on page 368
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
Switching
Commands
Switching Feature Overview and Configuration
counters" on page 346
dynamic" on page 347
static" on page 349
342